Outboard Impeller Repair Kit 06193-ZV5-020 for Honda 40 50hp BF40A 50A BF40D 50D

Description

▲
Application:
Suitable for Honda outboard
40 50 hp BF40A, BF40D, BF50A, BF50D outboard. Please check your models before purchasing.
▲
Direct Replacement:
Our water pump impeller repair kit is made from high quality material and well-tested, durable & reliable, directly replace for part number: 06193-ZV5-020, 06193-ZV5-010, 06193-ZV5-000.
▲
Function:
Used to repair/rebuild the water pump impeller for Honda outboard engine, makes service job more easy and convenient.
▲
Packag
e Includes:
1 x Impeller Housing (19221-ZV5-000) 1 x Housing Insert (19223-ZV5-000) 1 x Impeller Gasket (19233-ZV5-000) 1 x Impeller Gasket (19242-ZV5-000) 1 x Water Pump Seal (91356-ZV5-000)1 x Impeller Wear Plate (19231-ZV5-000)1 x Impeller (19210-ZV5-003) 1 x Water Tube Seal (19253-ZV5-000)1 x Impeller Key (90752-ZV5-003) 4 x Bolts (90103-ZY1-000)4 x Collar (91555-ZV5-000).
▲
100% Satisfaction Guarantee
:
If you're not 100% satisfied with this 06193-ZV5-020 Water Pump Impeller Repair Kit, simply return it for a full refund in 60 days.
We support 12 months’ Warranty.
Please check the model：
Fit for Honda outboard models: BF40A、BF40D、BF50A、BF50D.
Water pump replacement/ repair kit for Honda # 06193-ZV5-020 40/50 HP Outboard Motors.
1. Start reassembling the pump by applying marine grease to the inner surface of the impeller liner, housing O-ring, and the water tube seal ring.
2. Install the impeller by turning it counterclockwise into the impeller liner. Make sure the open end of the keyway is visible and will face out when installed in the pump.
3. Insert a new greased O-ring and water tube seal ring into the impeller housing. Install the impeller/liner into the housing. Install the impeller cover and gasket.
4. Place a small amount of marine grease on the Woodruff key and insert it onto the flat surface of the vertical shaft.
5. Slide the impeller housing assembly over the shaft, making sure to align the Woodruff key with the impeller keyway.
6. Install the four impeller housing collars and 6 x 40 mm bolt washers and torque to 8.0 ft•lb (11 N•m) in a crisscross pattern to make sure the housing seats correctly.
7. Apply marine grease to the vertical shaft splines and two dowel pins, and then install the gear case assembly into the motor. If needed, turn the prop clockwise to align the vertical shaft splines. Make sure the water tube seal ring has been greased for ease of installation. Connect the speed sensor tube.
8. Start threading the 8 x 65 mm and four 10 x 40 mm flange bolts and washers to hold the gear case in place. Install washers with the rounded edge facing the painted surface of the gearcase assembly.
9. Torque the four 10 mm gear case bolts to 26 ft•lb (35 N•m) and the 8 mm hex bolt to 16 ft•lb (22 N•m).
Package includes
1 x Impeller Housing (19221-ZV5-000)
1 x Housing Insert (19223-ZV5-000)
1 x Impeller Gasket (19233-ZV5-000)
1 x Impeller Gasket (19242-ZV5-000)
1 x Water Pump Seal (91356-ZV5-000)
1 x Impeller Wear Plate (19231-ZV5-000)
1 x Impeller (19210-ZV5-003)
1 x Water Tube Seal (19253-ZV5-000)
1 x Impeller Key (90752-ZV5-003)
4 x Bolts (90103-ZY1-000) & 4 x Collar (91555-ZV5-000)
Payment must be received within 7 business days of auction closing.
1.Orders will be ship out within 1-2 business days after payment has cleared.
2.Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.
3.
All our items are shipped from
the United States
and the package will be free of charge for Express Shipping via
USPS
,
UPS
. Absolutely Fast and Safe!
★If there are any problems with our products, Please feel free to contact us. We will always here to solve them for you. And please DO NOT leave us Neutral / negative feedback.
1. I
f you're not 100% satisfied with our item, simply return it for a full refund in 60 days.
We support 12 months’ Warranty.
2.
Leave a message note in returned box quoting your item(s) ID and buyer ID.
3.
All returned products must be in their original condition and package. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
4.
It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
5.
Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.
Any question, please let me know
.
We try our best to reply to your emails as soon as possible.
Please allow 24 hours for us to response. your understanding and patience is much appreciated!
1.
Please contact us before leaving Negative feedback or open any disputes on eBay if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues.
2.
If possible,could you please leave us a positive feedback and 5 star DSR when you receive the item in satisfactory condition. Your kind support will be highly appreciated by us and keep us moving forward.
On May-25-22 at 22:30:55 PDT, seller added the following information:
On May-26-22 at 03:26:27 PDT, seller added the following information:
On May-26-22 at 08:50:08 PDT, seller added the following information:
On May-26-22 at 14:03:48 PDT, seller added the following information: